Release Notes Release Notes

6.1.2
- 6.2
- 6.1

Back Next

Known Limitations

The following table describes the known limitations:

CR	Description
334528	You cannot copy objects from one project to another from the RulePoint user interface. Workaround: First export the objects, and then import them into the project.
338532	You cannot filter an object across multiple column categories.
338567	You cannot make an event expire or stop an event from expiration manually. The Expires In property in a topic configuration determines the expiry of events.
339839	The time interval for a source schedule is in milliseconds. If your interval is in days, hours, minutes, weeks, and months, you must convert the interval to milliseconds.
339874	You cannot update the parameter values of a source from the dashboard. To change the values, you need to update the value in the source and redeploy the source.
342062	When you work with ACLs or when you export or import many objects, the ConcurrentModificationExceptions message might appear. Workaround: Ignore these exceptions.
342323	You cannot delete projects that contain objects. Workaround: To delete a project, you must first delete all the objects in that project and then delete the project.
343903	When you configure a JMS source or responder that refers to a topic of an external QPid service, QPid does not recognize the "topic/" prefix in the JMS destination field. Workaround: Do not provide the "topic/" prefix in the JMS destination field.
350521	If you try to work on a project while an import of objects is in progress, a SocketException error is logged in the log file.
350597	You cannot delete an object from one project while import is in progress in another project. Workaround: You must wait until the import is complete before you delete the object.
351410	The RulePoint installer does not validate the host IP address during the installation process.
351691	If you upload an import file from the ImportExport folder under the <Rulepoint installation directory>\design\webapps\rulepoint\ directory while using Internet Explorer 10 or Chrome, the file is deleted from the folder. Workaround: Verify that you copy the file that you want to import to a different location, and then upload the files from that location.
351923	When you export objects from a project where all the objects are not in the valid state, an error occurs. Workaround: Before you export objects, verify that you have at least one valid object in that project.
352770	An event transformer configuration allows only asterisk (*) in the Properties Configuration field.
353013	When the Informatica Data Direct driver uses the SQL source or responder for a long period, the driver might stop receiving messages from the database, and the following message appears: com.informatica.cep.sc.dataadapter.api.IOAdapterException: java.sql.SQLException: An SQLException was provoked by the following failure: java.lang.NegativeArraySizeException Workaround: Increase the database pool size, reduce the frequency of using the SQL source, or use the Oracle driver.
353422	You cannot use a watchlist-based picklist for parameterized topics in a template. For example, if you use a watchlist-based picklist for the topic_name parameter in the WHEN 1 <<topic_name>> t0 THEN 'RTAM Response' DRQL, an error appears. You must instead use a picklist of topics for the parameter.
353434	The import operation fails if the required jars are not available in the Custom directory. Workaround: If you have any custom objects, you must place the corresponding jar file in the Custom folder under <Rulepoint installation directory> .
371573	Event search is not available for blank or null columns.
371874	The rule profile does not display the stack trace for the list2vars analytic.
374366	The template parameter values are reset even when you use the same parameter names to update the DRQL.
378031	When you use the design.exe Windows service to stop the design-time instance, the operation might time out. Workaround: Stop the Java process manually.
378802	If you undeploy a template policy and then delete an event processor, an error occurs when you deploy the template policy again. Workaround: This error might occur if the template policy maps to the deleted event processor. Create a template deployment policy and map it to the new event processor.
379081	When you delete a large number of RTAM alerts, RTAM might not respond because of a deadlock in the database. Workaround: Shut down the topology, and then delete the alerts in the RTAM.
379275	Rule tracing does not occur for rules that reference sources configured with markers.
379920	When you change the date and time format in the user preferences, the event date and time in the event preview and search do not reflect the specified format.
380080	When you name a parameter as NAME in the DRQL of a template rule, the rule name does not display correctly.
380445	The CURRENTDATE, CURRENTTIME, and CURRENTTIMESTAMP event generator functions use the same date format. If an event in an XML file uses all these functions, the event properties are set with the same value. Workaround: Use one of the event generator functions when you set the event properties in the XML file.
380475	When you import exported LDAP users and roles created in RulePoint, the remote users and roles are imported as local users and roles.
380605	You cannot export standalone roles using the export selected option.
380682	RulePoint cannot differentiate between database users and LDAP users if the user names are the same. When you assign ACLs to a user, the ACLs are shared among the users.
381087	When you disable rule tracing in an event processor and restart the topology, you can still view the Enable View Tracing option for that event processor. The rule profile does not generate. Workaround: Disable and then re-enable rule tracing to view the rule profile.
381312	The PowerExchange for Ultra Messaging adapter plug-in does not acknowledge the receipt of a message back to the Ultra Messaging Queue. Though the adapter receives the message from the Ultra Messaging Queue topic, the messages are not dequeued from the Ultra Messaging Queue topic.
381347	The template is saved when you force save a template that has no parameters.
381415	On Internet Explorer 10, when you test the email connection while configuring a connection or source, the Testing connection_object message does not display and the browser turns unresponsive. Workaround: This error occurs if you provide incorrect connection settings. Correct the settings and test the connection again.
381419	The response parameter does not fetch the latest event, but fetches the oldest event in the event set.
381771	The errors from the instant messaging source and responder are not propagated to the dashboard.
381784	In a rule with multiple topics, the rule tracing summary might not display the correct number of activations.
381820	When you select a node on the dashboard, the graph might take a long time to display the number of activations.
381945	Even if you do not have the view permissions for all the primary objects, you can still perform the deployall operation. In a similar scenario, the undeployall operation does not display an error.
381973	If you stop any of the RulePoint instances abruptly and then restart the instances, the node statistics and log viewer are not available. Workaround: To start the logs and node statistics, perform a clean shutdown of all processes and restart the RulePoint instances.
382167	Display issues occur when you run the application in low screen resolution. Workaround: Increase the screen resolution of the application.
382259	Chrome does not display the objects when you filter objects by the last modified date. This error occurs when you set different time zones for the server and the database. Workaround: Make sure that you set the same time zone for the server and the database.
395501	If you specify a sequence number in the Kinesis source that is not valid, no event is generated. The dashboard does not display an error message for the source controller that contains the deployed Kinesis source.
395576	The CloudWatch topic details in the Event view of the dashboard displays the time stamp twice. Workaround: This error occurs because the name of the time stamp parameter for both the event time stamp and the CloudWatch metric time stamp is the same. Change the name of the CloudWatch metric time stamp.
395985	If you specify a stream for the Kinesis source that is not valid, the dashboard does not display an error message for the Kinesis source.
396162	If you specify a namespace, metric, or dimension that is not valid while configuring a CloudWatch source, the dashboard does not display an error message for the source controller that contains the deployed CloudWatch source.
401509	When you deploy a rule that references a system marker topic, the dashboard displays the number of events generated under the system_marker topic as 0 even though there are activations.
401844	If you undeploy the objects in a multinode topology that contains multiple activity managers configured for specific types of events, the objects still remain on the dashboard. The activity manager does not update the existing status of the objects on the dashboard. Workaround: Manually delete the undeployed objects from the activity manager tables in the database.
402067	If you delete a user or role in RulePoint configured with the Microsoft SQL Server database that is case sensitive, an internal server error occurs. Workaround: Manually delete the user or role from the database.
402123	If you leave the user name and password fields blank in the configuration files while using Windows authentication for Microsoft SQL Server, RulePoint generates an error. Workaround: Provide a properly encrypted string as the password and a regular string as the user name.
402125	Even after you rectify an error encountered with a source configured with a static schedule, the dashboard continues to display an error message for the source controller. Workaround: Undeploy the affected source and deploy it again.
402147	When you enable rule tracing for a rule from the dashboard, the stack trace might not be displayed for certain conditions when the DRQL is complex.
402302	Parallel processing is enabled by default in a wizard rule. Workaround: Clear the Enable Parallel Processing check box if you do not want to run the rule with multiple threads.

Rename Saved Search

Table of Contents

Release Notes Release Notes

Release Notes Release Notes

Known Limitations

Known Limitations