Preface
Introduction to Informatica Data Engineering Integration
- Informatica Data Engineering Integration Overview
  - Example
- Data Engineering Integration Component Architecture
- Data Engineering Integration Engines
- Data Engineering Process
- Data Warehouse Optimization Mapping Example
Mappings
- Overview of Mappings
- Mapping Run-time Properties
- PreSQL and PostSQL Queries for JDBC Sources
- Sqoop Mappings in a Hadoop Environment
- Mapping Output Binding
- Rules and Guidelines for Mappings in a Non-native Environment
- Workflows that Run Mappings in a Non-native Environment
- Configuring a Mapping to Run in a Non-native Environment
  - Configure Mappings to Run on Dataproc
- Audits
- Mapping Execution Plans
- Troubleshooting Mappings in a Non-native Environment
- Mappings in the Native Environment
Mapping Optimization
- Mapping Optimization
- Mapping Recommendations and Analysis
- Enabling Data Compression on Temporary Staging Tables
  - Step 1. Enable Data Compression in the Hadoop Connection
  - Step 2. Enable Data Compression on the Hadoop Environment
- Truncating Partitions in a Hive Target
- Hive Warehouse Connector and Hive LLAP
  - Enabling the Hive Warehouse Connector and Hive LLAP
- Scheduling, Queuing, and Node Labeling
- Data Engineering Recovery
- Spark Engine Optimization for Sqoop Pass-Through Mappings
Sources
- Overview of Sources
- PowerExchange Adapter Sources
- Sources on Databricks
- File Sources on Hadoop
- Relational Sources on Hadoop
- Hive Sources on Hadoop
  - PreSQL and PostSQL Commands
  - Rules and Guidelines for Hive Sources on the Blaze Engine
- Sqoop Sources on Hadoop
Targets
- Overview of Targets
- PowerExchange Adapter Targets
- Targets on Databricks
- File Targets on Hadoop
- Message Targets on Hadoop
- Relational Targets on Hadoop
- Hive Targets on Hadoop
- Sqoop Targets on Hadoop
  - Rules and Guidelines for Sqoop Targets
Transformations
- Overview of Transformations
- Address Validator Transformation in a Non-native Environment
  - Address Validator Transformation on the Blaze Engine
  - Address Validator Transformation on the Spark Engine
    - Address Validator Transformation in a Streaming Mapping
  - Address Validator Transformation on the Databricks Spark Engine
- Aggregator Transformation in a Non-native Environment
  - Aggregator Transformation on the Blaze Engine
  - Aggregator Transformation on the Spark Engine
    - Aggregator Transformation in a Streaming Mapping
  - Aggregator Transformation on the Databricks Spark Engine
- Case Converter Transformation in a Non-native Environment
- Classifier Transformation in a Non-native Environment
- Comparison Transformation in a Non-native Environment
- Consolidation Transformation in a Non-native Environment
  - Consolidation Transformation on the Blaze Engine
  - Consolidation Transformation on the Spark Engine
  - Consolidation Transformation on the Databricks Spark Engine
- Data Masking Transformation in a Non-native Environment
  - Data Masking Transformation on the Blaze Engine
  - Data Masking Transformation on the Spark Engine
    - Data Masking Transformation in a Streaming Mapping
- Data Processor Transformation in a Non-native Environment
- Decision Transformation in a Non-native Environment
  - Decision Transformation on the Spark Engine
  - Decision Transformation on the Databricks Spark Engine
- Expression Transformation in a Non-native Environment
  - Expression Transformation on the Blaze Engine
  - Expression Transformation on the Spark Engine
    - Expression Transformation in a Streaming Mapping
  - Expression Transformation on the Databricks Spark Engine
- Filter Transformation in a Non-native Environment
  - Filter Transformation on the Blaze Engine
- Hierarchical to Relational Transformation in a Non-native Environment
- Java Transformation in a Non-native Environment
  - Java Transformation on the Blaze Engine
  - Java Transformation on the Spark Engine
    - Java Transformation in a Streaming Mapping
- Joiner Transformation in a Non-native Environment
  - Joiner Transformation on the Blaze Engine
  - Joiner Transformation on the Spark Engine
    - Joiner Transformation in a Streaming Mapping
  - Joiner Transformation on the Databricks Spark Engine
- Key Generator Transformation in a Non-native Environment
  - Key Generator Transformation on the Blaze Engine
  - Key Generator Transformation on the Spark Engine
  - Key Generator Transformation on the Databricks Spark Engine
- Labeler Transformation in a Non-native Environment
- Lookup Transformation in a Non-native Environment
  - Lookup Transformation on the Blaze Engine
  - Lookup Transformation on the Spark Engine
    - Lookup Transformation in a Streaming Mapping
  - Lookup Transformation on the Databricks Spark Engine
- Macro Transformation in a Non-native Environment
- Match Transformation in a Non-native Environment
  - Match Transformation on the Blaze Engine
  - Match Transformation on the Spark Engine
  - Match Transformation on the Databricks Spark Engine
- Merge Transformation in a Non-native Environment
- Normalizer Transformation in a Non-native Environment
- Parser Transformation in a Non-native Environment
- Rank Transformation in a Non-native Environment
  - Rank Transformation on the Blaze Engine
  - Rank Transformation on the Spark Engine
    - Rank Transformation in a Streaming Mapping
  - Rank Transformation on the Databricks Spark Engine
- Relational to Hierarchical Transformation in a Non-native Environment
- Router Transformation in a Non-native Environment
- Rule Specification Transformation in a Non-native Environment
- Sequence Generator Transformation in a Non-native Environment
  - Sequence Generator Transformation on the Blaze Engine
  - Sequence Generator Transformation on the Spark Engine
  - Sequence Generator Transformation on the Databricks Spark Engine
- Sorter Transformation in a Non-native Environment
  - Sorter Transformation on the Blaze Engine
  - Sorter Transformation on the Spark Engine
    - Sorter Transformation in a Streaming Mapping
  - Sorter Transformation on the Databricks Spark Engine
- Standardizer Transformation in a Non-native Environment
- Union Transformation in a Non-native Environment
  - Union Transformation in a Streaming Mapping
- Update Strategy Transformation in a Non-native Environment
  - Update Strategy Transformation on the Blaze Engine
  - Update Strategy Transformation on the Spark Engine
  - Update Strategy Transformation on the Databricks Spark Engine
- Weighted Average Transformation in a Non-native Environment
Python Transformation
- Python Transformation Overview
- Python Transformation Ports
- Python Transformation Advanced Properties
- Python Transformation Components
  - Resource File
  - Python Code
- Rules and Guidelines for the Python Transformation
  - Python Transformation in a Streaming Mapping
- Creating a Python Transformation
  - Creating a Reusable Python Transformation
  - Creating a Non-Reusable Python Transformation
- Example: Add an ID Column to Nonpartitioned Data
- Example: Use Partitions to Find the Highest Salary
- Use Case: Operationalize a Pre-Trained Model
Data Preview
- Overview of Data Preview
  - Connections and Cluster Distributions that Support Data Preview
- Data Preview Process
- Previewing Data
- Data Preview Interface for Hierarchical Data
- Data Preview on Transformations
- Data Preview Logs
- Rules and Guidelines for Data Preview on the Spark Engine
Cluster Workflows
- Cluster Workflows Overview
  - Cluster Workflows Platform Support
- Cluster Workflow Components
- Cluster Workflows Process
- Create the Workflow and the Create Cluster Task
- Where to Configure Parameters for Cluster Creation
  - Using the Developer Tool to Configure Cluster Creation Properties
  - Using a JSON File to Configure Cluster Creation Properties
    - Create the JSON File
    - Enable the JSON File
- Add a Mapping Task
- Add a Delete Cluster Task
- Deploy and Run the Workflow
  - Monitoring Azure HDInsight Cluster Workflow Jobs
- Configure Databricks Clusters Using Warm Pools
- Create Cluster Task Properties
Profiles
- Profiles Overview
- Native Environment
- Hadoop Environment
  - Column Profiles for Sqoop Data Sources
- Sampling Options
- Creating a Single Data Object Profile in Informatica Developer
- Creating an Enterprise Discovery Profile in Informatica Developer
- Creating a Column Profile in Informatica Analyst
- Creating an Enterprise Discovery Profile in Informatica Analyst
- Creating a Scorecard in Informatica Analyst
- Monitoring a Profile
- Profiling Functionality Support
- Troubleshooting
Monitoring
- Overview of Monitoring
- Hadoop Environment Logs
- Blaze Engine Monitoring
- Spark Engine Monitoring
Hierarchical Data Processing
- Overview of Hierarchical Data Processing
- How to Develop a Mapping to Process Hierarchical Data
- Complex Data Types
- Complex Ports
- Complex Data Type Definitions
- Type Configuration
- Complex Operators
  - Extracting an Array Element Using a Subscript Operator
  - Extracting a Struct Element Using the Dot Operator
- Complex Functions
- Rules and Guidelines for Processing Hierarchical Data on the Spark Engine
- Midstream Parsing of Hierarchical Data
Hierarchical Data Processing Configuration
- Hierarchical Data Conversion
- Convert Relational or Hierarchical Data to Struct Data
  - Creating a Struct Port
- Convert Relational or Hierarchical Data to Nested Struct Data
  - Creating A Nested Complex Port
- Extract Elements from Hierarchical Data
  - Extracting Elements from a Complex Port
- Flatten Hierarchical Data
  - Flattening a Complex Port
Hierarchical Data Processing with Schema Changes
- Overview of Hierarchical Data Processing with Schema Changes
- How to Develop a Dynamic Mapping to Process Schema Changes in Hierarchical Data
- Flatten Hierarchical Data with Schema Changes
  - Flatten a Dynamic Struct
- Dynamic Complex Ports
  - Dynamic Ports and Dynamic Complex Ports
  - Dynamic Complex Ports in Transformations
- Input Rules for a Dynamic Complex Port
- Port Selectors for Dynamic Complex Ports
- Dynamic Expressions
  - Example - Dynamic Expression to Construct a Dynamic Struct
- Complex Operators
- Complex Functions
- Rules and Guidelines for Dynamic Complex Ports
- Optimized Mappings
Intelligent Structure Models
- Overview of Intelligent Structure Models
- Intelligent Structure Discovery Process
- Use Case
- Using an Intelligent Structure Model in a Mapping
- Rules and Guidelines for Intelligent Structure Models
- How to Create a Mapping with an Intelligent Structure Model
  - Mapping Example
- Create an Intelligent Structure Model in Cloud Data Integration
Blockchain
- Blockchain Overview
  - Blockchain Process
- Blockchain Data Objects
- Blockchain Data Object Operations
- Use Case: Using a Blockchain Source to Improve Services in a Vehicle Lifecycle
  - Mapping Overview
Stateful Computing
- Overview of Stateful Computing
- Windowing Configuration
- Window Functions
- Windowing Examples
Appendix A: Connections Reference
- Connections Overview
- Cloud Provisioning Configuration
  - AWS Cloud Provisioning Configuration Properties
  - Azure Cloud Provisioning Configuration Properties
  - Databricks Cloud Provisioning Configuration Properties
- Amazon Redshift Connection Properties
- Amazon S3 Connection Properties
- Blockchain Connection Properties
- Cassandra Connection Properties
- Confluent Kafka Connection
  - General Properties
  - Confluent Kafka Broker Properties
  - SSL Properties
  - Creating a Confluent Kafka Connection Using infacmd
- Databricks Connection Properties
- Google Analytics Connection Properties
- Google BigQuery Connection Properties
- Google Cloud Spanner Connection Properties
- Google Cloud Storage Connection Properties
- Google PubSub Connection Properties
- Hadoop Connection Properties
  - Hadoop Cluster Properties
  - Common Properties
  - Reject Directory Properties
  - Blaze Configuration
  - Spark Configuration
- HDFS or View File System (ViewFS) Connection Properties
- HBase Connection Properties
- HBase Connection Properties for MapR-DB
- Hive Connection Properties
- JDBC Connection Properties
  - JDBC Connection String
  - Sqoop Connection-Level Arguments
  - Delta Lake JDBC Connection Properties
- JDBC V2 Connection Properties
- Kafka Connection Properties
  - General Properties
  - Kafka Broker Properties
  - SSL Properties
  - Creating a Kafka Connection Using infacmd
- Kudu Connection Properties
- Microsoft Azure Blob Storage Connection Properties
- Microsoft Azure Cosmos DB SQL API Connection Properties
- Microsoft Azure Data Lake Storage Gen1 Connection Properties
- Microsoft Azure Data Lake Storage Gen2 Connection Properties
- Microsoft Azure SQL Data Warehouse Connection Properties
- Snowflake Connection Properties
- Creating a Connection to Access Sources or Targets
- Creating a Hadoop Connection
- Configuring Hadoop Connection Properties
  - Cluster Environment Variables
  - Cluster Library Path
  - Common Advanced Properties
  - Blaze Engine Advanced Properties
  - Spark Advanced Properties
Appendix B: Data Type Reference
- Data Type Reference Overview
- Transformation Data Type Support in a Non-native Environment
- Complex File and Transformation Data Types
- Flat File and Transformation Data Types
- Hive Data Types and Transformation Data Types
  - Hive Complex Data Types
- Sqoop Data Types
Appendix C: Function Reference
- Function Support in a Non-native Environment
- Function and Data Type Processing

User Guide

10.5.7
- 10.5.6
- 10.5.5
- 10.5.4
- 10.5.3
- 10.5.2
- 10.5.1
- 10.5
- 10.4.1
- 10.4.0
- 10.2.2 HotFix 1
- 10.2.2 Service Pack 1
- 10.2.2
- 10.2.1

Back Next

Google BigQuery Connection Properties

When you set up a Google BigQuery connection, you must configure the connection properties.

The order of the connection properties might vary depending on the tool where you view them.

The following table describes the Google BigQuery connection properties:

Property	Description
Service Account ID	Specifies the client_email value present in the JSON file that you download after you create a service account in Google BigQuery.
Service Account Key	Specifies the private_key value present in the JSON file that you download after you create a service account in Google BigQuery.
Connection mode	The mode that you want to use to read data from or write data to Google BigQuery. Select one of the following connection modes: Simple. Flattens each field within the Record data type field as a separate field in the mapping. Hybrid. Displays all the top-level fields in the Google BigQuery table including Record data type fields. PowerExchange for Google BigQuery displays the top-level Record data type field as a single field of the String data type in the mapping. Complex. Displays all the columns in the Google BigQuery table as a single field of the String data type in the mapping. Default is Simple.
Schema Definition File Path	Specifies a directory on the client machine where the Data Integration Service must create a JSON file with the sample schema of the Google BigQuery table. The JSON file name is the same as the Google BigQuery table name. Alternatively, you can specify a storage path in Google Cloud Storage where the Data Integration Service must create a JSON file with the sample schema of the Google BigQuery table. You can download the JSON file from the specified storage path in Google Cloud Storage to a local machine.
Project ID	Specifies the project_id value present in the JSON file that you download after you create a service account in Google BigQuery. If you have created multiple projects with the same service account, enter the ID of the project that contains the dataset that you want to connect to.
Storage Path	This property applies when you read or write large volumes of data. Path in Google Cloud Storage where the Data Integration Service creates a local stage file to store the data temporarily. You can either enter the bucket name or the bucket name and folder name. For example, enter gs://<bucket_name> or gs://<bucket_name>/<folder_name>
Dataset ID	Not applicable for PowerExchange for Google BigQuery.
Use Legacy SQL For Custom Query	Not applicable for PowerExchange for Google BigQuery.
Dataset Name for Custom Query	Not applicable for PowerExchange for Google BigQuery.
Staging Dataset	The Google BigQuery dataset name where you want to create the staging table to stage the data. You can define a Google BigQuery dataset that is different from the source or target dataset.
Region ID	The region name where the Google BigQuery dataset resides. For example, if you want to connect to a Google BigQuery dataset that resides in Las Vegas region, specify us-west4 as the Region ID . In the Storage Path connection property, ensure that you specify a bucket name or the bucket name and folder name that resides in the same region as the dataset in Google BigQuery. For more information about the regions supported by Google BigQuery, see the following Google BigQuery documentation:https://cloud.google.com/bigquery/docs/locations
Optional Properties	Specifies whether you can configure certain source and target functionalities through custom properties. You can select one of the following options: None. Select if you do not want to configure any custom properties. Required. If you want to specify custom properties to configure the source and target functionalities. Default is None.
Provide Optional Properties	Comma-separated key-value pairs of custom properties to enable certain source and target functionalities. Appears only when you select Required in the Optional Properties. For more information about the list of custom properties that you can specify, see the Informatica Knowledge Base article: https://kb.informatica.com/faq/7/Pages/26/632722.aspx

Rename Saved Search

Table of Contents

User Guide

User Guide

Google BigQuery Connection Properties

Google BigQuery Connection Properties