Table of Contents

Search

  1. Preface
  2. Command Line Programs and Utilities
  3. Installing and Configuring Command Line Utilities
  4. Using the Command Line Programs
  5. Environment Variables for Command Line Programs
  6. Using infacmd
  7. infacmd as Command Reference
  8. infacmd aud Command Reference
  9. infacmd autotune Command Reference
  10. Infacmd bg Command Reference
  11. infacmd ccps Command Reference
  12. infacmd cluster Command Reference
  13. infacmd cms Command Reference
  14. infacmd dis Command Reference
  15. Infacmd dis Queries
  16. infacmd dp Command Reference
  17. infacmd idp Command Reference
  18. infacmd edp Command Reference
  19. Infacmd es Command Reference
  20. infacmd ics Command Reference
  21. infacmd ipc Command Reference
  22. infacmd isp Command Reference
  23. infacmd ldm Command Reference
  24. infacmd mas Command Reference
  25. infacmd mi Command Reference
  26. infacmd mrs Command Reference
  27. infacmd ms Command Reference
  28. infacmd oie Command Reference
  29. infacmd ps Command Reference
  30. infacmd pwx Command Reference
  31. infacmd roh Command Reference
  32. infacmd rms Command Reference
  33. infacmd rtm Command Reference
  34. infacmd sch Command Reference
  35. infacmd search Command Reference
  36. infacmd sql Command Reference
  37. infacmd tdm Command Reference
  38. infacmd tools Command Reference
  39. infacmd wfs Command Reference
  40. infacmd ws Command Reference
  41. infacmd xrf Command Reference
  42. infacmd Control Files
  43. infasetup Command Reference
  44. pmcmd Command Reference
  45. pmrep Command Reference
  46. Working with filemanager
  47. Working with pmrep Files

createService

createService

Creates an Enterprise Data Preparation Service.
The infacmd edp createService command uses the following syntax:
createService <-DomainName|-dn> domain_name <-UserName|-un> user_name <-Password|-pd> password [<-SecurityDomain|-sdn> security_domain] [<-ResilienceTimeout|-re> timeout_period_in_seconds] <-ServiceName|-sn> service_name [<-Description|-des> description] <-NodeName|-nn> node_name | <-GridName|-gn> grid_name [<-BackupNodes|-bn> node_name1,node_name2,...] <-ServiceOptions|-so> option_name=value ...(HDFSConnection*,HiveConnection*,HadoopConnection*,HDFSSystemDirectory*,HiveTableStorageFormat(DefaultFormat|Parquet|ORC (default DefaultFormat)),LogLevel(FATAL|ERROR|WARNING|INFO|TRACE|DEBUG (default INFO)),customLogDirectory,SecurityMode(simple|kerberos (default simple)),KerberosPrincipal(Principal Name for User Impersonation),KerberosKeyTabFileName(SPN Keytab File for User Impersonation), LogAuditEvents(true|false (default false)),JDBCPort,ZeppelinURL,MaxFileUploadSize(default=512MB),DownloadRowsSize(default=1000000),MaxRecommendations(default=10),MaxSampleSize(default=50000),SampleSize(default=50000),hiveExecutionEngine(MR|Spark|Tez|Cluster-Default (default=Cluster-Default),LocalSystemDirectory*,SolrJVMOptions,IndexDir) [<-LicenseName|-ln> license_name] [<-HttpPort|-hp> http_port] [<-HttpsPort|-hsp> https_port] [<-KeystoreFile|-kf> keystore_file_location] [<-KeystorePassword|-kp> keystore_password] [<-TruststoreFile|-tf> truststore_file_location] [<-TruststorePassword|-tp> truststore_password] [<-FolderPath|-fp> full_folder_path] <-RepositoryService|-rs> repository_service_name <-RepositoryUser|-rsun> repository_user [<-RepositoryPassword|-rspd> repository_password] [<-RepositorySecurityDomain|-rssdn> model_repository_security_domain] <-DataPreparationServiceName|-dpsn> data_preparation_service_name <-DISServiceName|-dsn> dis_service_name <-CatalogService|-ct> catalog_service_name <-CatalogServiceUser|-ctun> catalogservice_user <-CatalogServicePassword|-ctpd> catalogservice_password [<-CatalogSecurityDomain|-cssdn> catalog_security_domain]
The following table describes infacmd edp createService options and arguments:
Option
Argument
Description
-DomainName
-dn
domain_name
Required. Name of the Informatica domain. You can set the domain name with the -dn option or the environment variable INFA_DEFAULT_DOMAIN. If you set a domain name with both methods, the -dn option takes precedence.
-UserName
-un
user_name
Required if the domain uses Native or LDAP authentication. User name to connect to the domain. You can set the user name with the -un option or the environment variable INFA_DEFAULT_DOMAIN_USER. If you set a user name with both methods, the -un option takes precedence.
Optional if the domain uses Kerberos authentication. To run the command with single sign-on, do not set the user name. If you set the user name, the command runs without single sign-on.
-Password
-pd
password
Required if you specify the user name. Password for the user name. The password is case sensitive. You can set a password with the -pd option or the environment variable INFA_DEFAULT_DOMAIN_PASSWORD. If you set a password with both methods, the password set with the -pd option takes precedence.
-SecurityDomain
-sdn
security_domain
Required if the domain uses LDAP authentication. Optional if the domain uses native authentication or Kerberos authentication. Name of the security domain to which the domain user belongs. You can set a security domain with the -sdn option or the environment variable INFA_DEFAULT_SECURITY_DOMAIN. If you set a security domain name with both methods, the -sdn option takes precedence. The security domain name is case sensitive.
If the domain uses native or LDAP authentication, the default is Native. If the domain uses Kerberos authentication, the default is the LDAP security domain created during installation. The name of the security domain is the same as the user realm specified during installation.
-ResilienceTimeout
-re
timeout_period_in_seconds
Optional. Amount of time in seconds that infacmd attempts to establish or re-establish a connection to the domain. You can set the resilience timeout period with the -re option or the environment variable INFA_CLIENT_RESILIENCE_TIMEOUT. If you set the resilience timeout period with both methods, the -re option takes precedence.
-ServiceName
-sn
service_name
Required. Name of the Enterprise Data Preparation Service.
You cannot change the name of the service after you create it. The name is not case sensitive and must be unique within the domain. It cannot exceed 128 characters or begin with @. It also cannot contain spaces or the following special characters:
` ~ % ^ * + = { } \ ; : ' " / ? . , < > | ! ( ) ] [
-Description
-des
description
Optional. Description of the service.
-NodeName
-nn
node_name
Required if you do not specify grid name. Node where the service runs.
-BackupNodes
-bn
node_name1,node_name2,...
Optional. Nodes on which the service can run if the primary node is unavailable. You can configure backup nodes if you have high availability.
-ServiceOptions
-so
option_name=value ...
Optional. Service properties that define how the service runs. To enter multiple options, separate them with a space. To enter a value that contains a space or other non-alphanumeric character, enclose the value in quotation marks. You can define the following available service options:
  • HDFSConnection*
  • HiveConnection*
  • HadoopConnection*
  • HDFSSystemDirectory*
  • HiveTableStorageFormat(DefaultFormat|Parquet|ORC (default DefaultFormat))
  • LogLevel(FATAL|ERROR|WARNING|INFO|TRACE|DEBUG (default INFO))
  • customLogDirectory
  • SecurityMode(simple|kerberos (default simple))
  • KerberosPrincipal(Principal Name for User Impersonation)
  • KerberosKeyTabFileName(SPN Keytab File for User Impersonation)
  • LogAuditEvents(true|false (default false))
  • JDBCPort
  • ZeppelinURL
  • MaxFileUploadSize(default=512MB)
  • DownloadRowsSize(default=1000000)
  • MaxRecommendations(default=10)
  • MaxSampleSize(default=50000)
  • SampleSize(default=50000)
  • hiveExecutionEngine(MR|Spark|Tez|Cluster-Default (default=Cluster-Default)
  • LocalSystemDirectory*
  • SolrJVMOptions
  • IndexDir
-LicenseName
-ln
license_name
Optional. License object that allows the use of the service.
-HttpPort
-hp
http_port
Required if you do not specify an HTTPS port. Unique HTTP port number used for each Data Integration Service process. After you create the service, you can define different port numbers for each service process.
-HttpsPort
-hsp
https_port
Required if you do not specify an HTTP port. Unique HTTPS port number used for each service process. After you create the service, you can define different port numbers for each service process.
-KeystoreFile
-kf
keystore_file_location
Optional. Path and file name of the keystore file that contains the keys and certificates required if you use the HTTPS protocol for the service. You can create a keystore file with a keytool. keytool is a utility that generates and stores private or public key pairs and associated certificates in a keystore file. You can use the self-signed certificate or use a certificate signed by a certificate authority.
-KeystorePassword
-kp
keystore_password
Optional. Password for the keystore file.
-TruststoreFile
-tf
truststore_file_location
Optional. Path and the file name of the truststore file that contains authentication certificates for the HTTPS connection.
-TruststorePassword
-tp
truststore_password
Optional. Password for the truststore file.
-FolderPath
-fp
full_folder_path
Optional. Full path, excluding the domain name, to the folder in which you want to create the service. Must be in the following format:
/
parent_folder
/
child_folder
-RepositoryService
-rs
repository_service_name
Required. Name of the Model Repository Service to associate with the Enterprise Data Preparation Service.
-RepositoryUser
-rsun
-repository_username
Required. User account to use to log in to the Model Repository Service.
-RepositoryPassword
-rspd
-repository_password
Optional. Password for the Model Repository Service user account.
-RepositorySecurityDomain
-rssdn
model_repository_security_domain
Optional. Security domain to which the Model Repository Service user account belongs.
-DataPreparationServiceName
-dpsn
data_preparation_service_name
Required. Name of the Interactive Data Preparation Service to associate with the Enterprise Data Preparation Service.
-DISServiceName
-dsn
dis_service_name
Required. Name of the Data Integration Service to associate with the Enterprise Data Preparation Service.
-CatalogService
-ct
catalog_service_name
Required. Name of the Catalog Service to associate with the.
-CatalogServiceUser
-ctun
catalogservice_user
Required. User account to use to log in to the Catalog Service.
-CatalogServicePassword
-ctpd
catalogservice_password
Optional. Password for the Catalog Service user account.
-CatalogSecurityDomain
-cssdn
catalog_security_domain
Optional. Security domain to which the Catalog Service user account belongs.

0 COMMENTS

We’d like to hear from you!